1500 mm width NM400 steel chemical element size

Our after sales department is an very important part of our department structures. After the customer receive steel materials, our after sales department will follow up regularly and solve problems for them in time if they have the needs. We romise to return the goods for free for its lifetime if it is quality of the steel material itself. Meanwhile, if you have any advice or complaints, also welcome to feed back to our after sales department, and we are trying to give better service to you.

We can cut the large steel plates NM400 steel chemical element by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the NM400 steel chemical element product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

"We can supply NM400 steel chemical element, hot rolled pressure vessel plate available sizeThickness from 5mm to 150mm Width: from 1,500mm to 2,500mm Length: from 6,000mm to 12,000mmFor plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised.Technical conditions: Ultrasonic tested as per SA 578 or any other as per requirement ; MTC acc to EN 10204 / 3.2; Charpy Impact tested at -20/-46 DegC.; Furnace Normalised."

We had a wonderful trip in Phuket Island, Thailand. At the end of 2019, in order to thank employees for their hard work for a year and enrich their lives, our company organized a pleasant trip to Phuket Island, Thailand. The tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5 o'clock in the afternoon on the 22th December.