Chemical elements of hardox 450 price

Composition characteristics of Hardox 450 price product: (1) Low carbon: Due to high requirements for toughness, weldability and cold formability, its carbon content does not exceed 0.20%. 2) Add manganese-based alloying elements. 3) Adding auxiliary elements such as niobium, titanium or vanadium: a small amount of niobium, titanium or vanadium forms fine carbides or carbonitrides in the steel, which is beneficial to obtain fine ferrite grains and improve the strength and toughness of the steel.

The common delivery status of Hardox 450 price, SA516 Gr 70 plate is as follows: 1) SA516 Gr 70 plate quenching: the process of rapid cooling after heating to the temperature above the phase transformation point. 2) SA516 Gr 70 plate normalizing: after heating above the phase transition temperature, it is cooled normally (in air). 3) SA516 Gr 70 plate annealing: heating to above the phase transition temperature, cooling slowly. 4) SA516 Gr 70 plate tempering: after quenching, it is heated to a certain temperature (lower than the quenching temperature), kept warm, and then cooled.

WTST 37-3 steel plate is a kind of carbon steel plate. WTST 37-3 steel plate can be used to build low temperature sea water resistant containers. When the customer orders Hardox 450 price WTST 37-3 steel plate from us, our factory should roll it in full accordance with SEW 087-2 specification, and the factory will issue the original mill test certificate for inspection before delivery.

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.