hardox 400 vs mild steel suppliers with ISO certificate

BBN is a HARDOX 400 vs mild steel world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.

In the process of HARDOX 400 vs mild steel steel transportation, enterprises often use railway transportation, highway transportation, water transportation and other ways to transport. According to the cargo owner's requirements on the timeliness of the goods and the different transportation routes, our company will choose HARDOX 400 vs mild steel different modes of transportation. According to the specific needs of customers, or specify the mode of transportation.

X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This HARDOX 400 vs mild steel method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.

The Indian customer purchased our A516 Gr 70 pressure vessel steel plates to make tanks. They have very strict requirement for raw materials quality. For the A516 Gr 70 pressure vessel steel plates, they asked for Normalizing, 0℃ impact, A578 UT test, PWHT and so on tests, our Q/C department witness the production process with the technician from the customer company together. Meanwhile, we arrange BV inspection to check the quantity, spray mark, stamp on the A516 Gr 70 pressure vessel steel plates, and so on.

Our company supply various size and thickness HARDOX 400 vs mild steel, hot rolled plates. Plate thickness is available ranging 3mm to 350mm. Steel coils thickness are supplied in max. 25mm. Tolerances for carbon steel coils for conversion to: For minimum gauge orders, thickness and width tolerances are in accordance with the respective ASTM specifications of A568 for thicknesses of less than 0.230 inches(exclusive), and A635 for thicknesses of 0.230 inches to 1.00 inch, inclusive.

We had a wonderful trip in Phuket Island, Thailand. At the end of 2019, in order to thank employees for their hard work for a year and enrich their lives, our company organized a pleasant trip to Phuket Island, Thailand. The tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5 o'clock in the afternoon on the 22th December.