Is numerical control nm500 steel mechanical properties cutting good

Generally, the production process of NM500 steel mechanical properties seamless steel tube can be divided into cold rolling and hot rolling. The production process of cold-rolled seamless steel tube is generally more complicated than that of hot rolling. The tube blank must be first rolled by three rolls, and then be subject to sizing test and cutting after extrusion. Then enter the annealing process. In appearance, the cold-rolled seamless steel tube is shorter than the hot-rolled seamless steel tube, and the wall thickness of the cold-rolled seamless steel tube is generally smaller than that of the hot-rolled seamless steel tube, but the surface looks brighter than the thick wall seamless steel tube, the surface is not too rough, and the diameter is not too much burr.

Rolled sheet is a very common material in industrial construction. Rolled sheet at room temperature is cold-rolled sheet, and cold-rolled sheet is the rolling of hot-rolled coils below the recrystallization temperature. The hot-rolled sheet is rolled above the recrystallization temperature. So what is the difference between NM500 steel mechanical properties, hot rolled sheet and cold rolled sheet?

The main uses of flat steel are as follows. First, flat steel is used as a raw material for processing steel plates, which is convenient for transportation, takes up a small space, and can save transportation costs. Second, NM500 steel mechanical properties flat steel can be used as raw material for processing welded pipes. Flat steel can be a finished steel product, or it can be used as a billet for welded pipes and thin slabs for stacked sheets. Third, flat steel can be directly used as a steel structure. As a finished material, flat steel can be used for making hoop iron, tools and mechanical parts, and used as building frame structure and escalator in construction. Fourth, the flat steel has a smooth surface and a certain degree of beauty.