nm500 plate thickness size Standard Steel I-Beam Sizes

Although both HSLA steel plate and carbon steel plate belong to carbon structure and low alloy structure steel, there are some differences. First of all, NM500 plate thickness size, HSLA steel plate and carbon steel plate differ in strength, hardness and use. In terms of strength, the strength of HSLA steel plate is higher than carbon steel plate. In terms of hardness, the hardness of HSLA steel plate is also higher than that of carbon steel plate. And in the scope of use, the advantages of HSLA steel plate are more prominent, so the scope of HSLA steel plate use is more extensive than that of carbon steel plate.

T11 steel is a steel grade produced according to American Standard ASTM A213. T11 steel is used for boiler, superheater and heat exchanger tubes with minimum wall thickness. Chemical composition of ASTM A213 T11 steel: C 0.05-0.15, Si 0.50-1.00, Mn 0.30-0.60, P, S ≤ 0.025, Cr 1.00-1.50, Mo 0.44-0.65. Mechanical properties of ASTM A213 T11 steel: tensile strength ≥ 415 Mpa, yield strength ≥ 170 Mpa, elongation ≥ 30%. The main ASTM A213 steel pipe grades are A213 T11, A213 T12, A213 T22, NM500 plate thickness size, etc.

The company uses outsourced logistics operations. Our cooperated professional third-party logistics providers use the advantages of large-scale production and cost advantages to achieve cost savings by increasing the utilization of resources in each link, so that we can benefit from the separation of cost structure. Therefore, we can also provide customers with better, faster and more efficient cargo transportation, delivery, and lower freight costs.

Since its establishment, the company has been deeply supported and loved by customers with its unique business philosophy and business model. The company has always adhered to the tenet of "credibility first, integrity-based, quality first" and sincerely serves new and old customers. At the same time, it keeps pace with the times based on market orientation, continuously expands offline channels, and gradually establishes a complete online E-commerce business management platform. We will always promote our after-sales service to make client satisfied with our goods.

In 2016. Our company offer 1200 tons API 5L GR.B hot rolled coil to Bangladesh——100 tons for 3.9*625mm, and 1100 tons for 7*683mm. It is one tender project, we get the tender at the end of 2015, and arrange the production in 2016. They required the tolerance of thickness is +0.1/-0.2mm, and width tolerance is +/-0.5mm, which is a very high requirement for coil tolerance, but our mill handling this very well. and our Q/C department witness all of the process.

The alloy steel plate is among our business scope, and it is one of our main product. If you have any demands or questions about alloy steel plate, such as 34CrMo4 NM500 plate thickness size material properties, 42CrMo4 AISI equivalent, 12Cr1MoV equivalent ASTM, 40Cr material specification, 42CrMo hardness, 50CrMo4 chemical composition and so on, please free free to communicate with us. We have professional technical team and sales team, who will give you NM500 plate thickness size professional answers and quotation about alloy steel plate in time.