Supply heavy nm450 steel low price material performance

The hardness of NM450 steel low price, wear-resistant steel plate is an important standard to measure wear resistance. The hardness of wear-resistant steel plate can be divided into microhardness and surface hardness. The microhardness of carbide in the wear-resistant layer of wear-resistant steel plate can reach over HVl700-2000, and the surface hardness can reach HRC58-62. Chromium alloy is the main wear-resistant layer of wear-resistant steel plate, and other alloy components such as manganese, molybdenum, niobium, nickel are added at the same time.

Quenching is a heat treatment process in which steel parts are heated to above the critical temperature, and after proper heat preservation, the parts are quickly cooled to room temperature in water or oil, so that martensite transformation occurs. The hardness of the quenched NM450 steel low price increases sharply. Quenching is to prepare the organization for adjusting and improving the performance of NM450 steel low price during tempering, while tempering determines the performance and life of the workpiece.

Strip steel is mainly used for the manufacture of welded pipes, clamps, washers, spring blades, saw blades, blades and other fields, so the NM450 steel low price, strip steel specifications are also relatively standardized. First, the strip width should be within 1300mm, if it is too wide, it will become a steel plate, and the machining is not allowed to be too wide, otherwise it will fail. Second, the strip steel length is not limited, and the strip steel can be coiled together after bending, reducing most of the space.

The effect of alloy elements on the properties of heat treatment methods for thick steel plate: the performance of heat treatment method reflects the difficulty coefficient level of heat treatment process and the tendency of defects caused by heat treatment process. The key points include cutting performance, over temperature sensitivity, quenching aging tendency and air oxidation carburizing tendency. NM450 steel low price, Carbon steel has high machinability, and slow cooling method can be used in heat treatment, which can reduce the deformation and cracking tendency of the products. The addition of Mn and Si will increase the over temperature sensitivity of steel.